Table of Contents
Advertisement
H5CZ
Timer
Models with Instantaneous Contact Outputs
Mode A-2: Power ON delay (Timer resets when power comes ON.)
Basic operation
Power
Timing
Time-limit
output
Instantaneous
output
The Timer starts when the power comes ON or when
the reset input goes OFF.
Note: Output is instantaneous when setting is 0.
Mode b: Repeat cycle 1 (Timer resets when power comes ON.)
Basic operation
Power
t (time)
t (time)
Time-limit
output
Instantaneous
output
The Timer starts when the power comes ON or when
the reset input goes OFF.
Note: Normal output operation will not be possible if
the set time is too short.
Set the value to at least 100 ms.
Note: H5CZ-L8E@ Precautions
Set the Timer's set value before using the Timer in a self-holding circuit.
20
Detailed operation
Power
Reset Key
Time-limit
contacts, NC
Time-limit
contacts, NO
Instantaneous
contacts, NC
Instantaneous
contacts, NO
Detailed operation
t (time)
t (time)
contacts, NC
Sustained Output
contacts, NO
contacts, NC
One-shot Output
contacts, NO
Instantaneous
contacts, NC
Instantaneous
contacts, NO
t-a
t
t = Set time, Rt = Reset time (0.5 s min.), t – a < t (Indicates the time is less than the set time.)
t-a
t
t
t
t-a
Power
Reset Key
Time-limit
Time-limit
Time-limit
Time-limit
t = Set time, Rt = Reset time (0.5 s min.), t – a < t (Indicates the time is less than the set time.)
Either one-shot output or sustained output can be selected.
Rt
t
t-a
Rt
Rt
t
t
t
t-a
t-a
t-a
Rt
t-a
Advertisement
Table of Contents
