Table of Contents
Advertisement
LP Conversion
The appliance comes configured for Natural Gas from the factory. A kit to convert the fire pit to us propane (LP
gas) is included with the fire pit.
The LP conversion kit contains the burner orifice(s) listed under LP in the chart below:
10" Fire Pit Burner
13" Fire Pit Burner
18" Fire Pit Burner
22" Fire Pit Burner
32" Fire Pit Burner
This conversion kit must be installed by a qualified service agency in accordance with the
manufacturer's instructions and all applicable codes and requirements of the authority having
jurisdiction. If the information in these instructions is not followed exactly, a fire, explosion, or
production of carbon monoxide may result causing property damage, personal injury, or loss of life.
The qualified service agency is responsible for the proper installation of this kit. The installation is not
proper and complete until the operation of the converted appliance is checked as specified in the
manufacturer's instructions supplied with the kit.
LP Conversion Steps
1. Turn the fire pit over and place it on a soft,
protective surface such as cardboard or a drop
cloth. Remove the gas flex from the appliance
adapter.
2. Unscrew the appliance adapter from the air
mixing tube as shown to the right.
© Travis Industries, Inc.
Installation
WARNING
9/27/2023 - 1589
(qualified installers only)
NG
(1) - #30
NG
(2) - #30
NG
(2) - #21
NG
(2) – #19
NG
(4) - #21
3. Remove the appliance adapter and the attached NG
burner orifice from the mixing tube
LP
(1) - #42
LP
(2) - #43
LP
(2) – 7/64"
LP
(2) - #31
LP
(4) - #36
VF Outdoor Fire Pit Burners
23
Advertisement
Table of Contents
