Landscaping Block Enclosures - Travis Industries Fire Garden 94900340 Manual

18

Landscaping Block Enclosures

Landscaping blocks may be used to create the enclosure for
the VF burner. There is a bracket kit provided to support the
fire pit in the enclosure.
NOTE: The bracket kit can be used with square or round pits.
The brackets are made of aluminum and can be bent to match
the radius of a round enclosure.
 The brackets must be
installed so that the
portion of the bracket
that the burner plate
will rest on is between
4" and 8" from the top
of the finish material
on top of the
enclosure, to provide
protection from the wind.
 The brackets may be installed under the top course of blocks or a capstone if one is used.
NOTE: If installing the brackets under a capstone, the capstone must be heavy enough to support the weight of the
fire pit burner and media used on the burner.

The brackets can be used in dry stack or mortared applications.

Make sure the brackets on all sides are level with each other.
Inside Dimensions for Landscaping Block Enclosures
10" Fire Pit Burner
Square 25-1/8" x 25-1/8"
Base Plate (639mm x 639mm)
Round 25-1/8" diameter
Base Plate (639mm)
© Travis Industries, Inc.
Installation
13" Fire Pit Burner
28-1/8" x 28-1/8"
(715mm x 715mm)
28-1/8" diameter
(715mm)
9/27/2023 - 1589
(qualified installers only)
18" Fire Pit Burner 22" Fire Pit Burner
33-1/8" x 33-1/8"
(842mm x 842mm) (943mm x 943mm)
33-1/8" diameter
(842mm)
32" Fire Pit Burner
37-1/8" x 37-1/8" 47-1/8" x 47-1/8"
(1197mm x 1197mm)
37-1/8" diameter 47-1/8" diameter
(943mm)
VF Outdoor Fire Pit Burners
(1197mm)