Victory 4x4 VRKAWN2 Installation Instructions

Roof rack awning mount

R OOF R AC K

AWN IN G M OU NT

INS TAL L I NSTRUC T ION S

Please read the mounting instructions below carefully before attempting to install.

Be sure to check out the install video on the product page, if available.

Thank you for purchasing from Victory 4x4! Checkout our website, victory4x4.com for other great off-road

products. Be sure to rate and review our product online. If you have any questions or are missing parts, please

don't hesitate to call us at 269-459-8447!

Table of Contents

Need help?

Do you have a question about the VRKAWN2 and is the answer not in the manual?

Page 1 Be sure to check out the install video on the product page, if available. Thank you for purchasing from Victory 4x4! Checkout our website, victory4x4.com for other great off-road products. Be sure to rate and review our product online. If you have any questions or are missing parts, please...
Page 2 I NCLU D E D HARDWARE INCLUDED BO LT PACK(S ) 0 46-011 4 Note: Some Victory 4x4/JCR Offroad/SquatchProof products share hardware kits. Any extra hardware you may recieve that is not listed below can be repurposed or discarded. 1/4"-20 X .75"...
Page 3 I NCLU D E D PARTS...
Page 4 I NS TA L L AT I O N To install, start by sliding (2) of the provided slide in T-studs into the slots on each of the shorter sides of the crossbar, as shown below. If you have already installed the crossbar into your roofrack, you will need to take the bolts out of that end in order to be able to lift it out enough to slide the T-studs in.