Table of Contents
Advertisement
1.
RVX1000 external RealVision™ 3D sonar module (a LightHouse™ 3 or
LightHouse™ 4 compatible MFD is also required).
2. LightHouse™ 3 or LightHouse™ 4 compatible MFD with built in RealVision™
3D sonar module (i.e.: Axiom, Axiom+ or Axiom Pro MFDs).
3. RVM1600 external RealVision™ 3D Max sonar module (a LightHouse™ 4
compatible MFD is also required).
4. LightHouse™ 4 compatible MFD with built in RealVision™ 3D Max sonar
module (i.e.: Axiom 2 Pro RVM MFDs).
2.5 Parts supplied — RV-3xx series transducers
The following parts are supplied with all RV-3xx series transducer variants.
1.
Documentation pack
2. Locking collar kit (for transducer cable connector), consisting of:
• 2 x Split rings (includes spare)
• 1 x O-ring
• 1 x Locking collar
Document and product information
• 1 x Split ring fitting tool
3. Plastic hull nut
4. Cable protector
5. Nut for Anti-rotation bolt
6. Large internal isolator sleeve
7.
Washer for Anti-rotation bolt
8. Rubber washer
9. Transducer (including cable)
10. Anti-rotation bolt
11. Protective cap for Anti-rotation bolt
Transducer cable length
The length of the cable fitted to the transducer is:
• RV-300 — 8 m (26.2 ft)
• RV-312(P/S) and RV-320(P/S) — 2 m (6.5 ft)
Additional installation parts required
The following parts which are not supplied with the transducer are required
for installation:
1.
Non-corrosive locking wire
13
Advertisement
Table of Contents
Troubleshooting
