Figure 2-2. Attaching the Cable Management Bracket
Surface-Mounting the 8237
7
Tighten the screws on each side.
8
If you are connecting multiple 8237s in a stack, go to "Interconnecting 8237s"
on page 1-4.
9
If you are installing an Expansion Port, continue with the instructions under
"Installing an Expansion Port" on page 2-4. If you are not installing this
feature, continue with the instructions under "Installing and Routing Cables"
on page 2-4.
1
Place the 8237 on a flat, horizontal surface where it is to be used. The 8237
is not designed for vertical mounting.
2
If you are connecting multiple 8237s in a stack, go to "Interconnecting 8237s"
on page 1-5.
3
If you are installing an Expansion Port, continue with the instructions under
"Installing an Expansion Port" on page 2-4. If not, continue with the
instructions under "Installing and Routing Cables" on page 2-4.
Chapter 2. Installing the 8237
2-3