IBM 8237 Installation And User Manual page 133

B-16
8237 Hub Installation and Planning Guide
bootp-upgrade(5):
::= { basicHubEntry 14 }
basicHubAgentBaudrate OBJECT-TYPE
SYNTAX INTEGER {
ACCESS read-write
STATUS mandatory
DESCRIPTION "Baud rate of the console port"
::= { basicHubEntry 15 }
--
-- Basic FEM object
--
basicFemTable OBJECT-TYPE
SYNTAX SEQUENCE OF BasicFemEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "Basic information about FEM ports in a system.
Each port belongs to a group.
is the same as the group index of the
basicPortTable: that is, basicPortGroupIndex."
::= { basicGroup 2 }
basicFemEntry OBJECT-TYPE
SYNTAX BasicFemEntry
ACCESS not-accessible
STATUS mandatory
INDEX { basicFemHubIndex }
::= { basicFemTable 1 }
BasicFemEntry ::= SEQUENCE
{
basicFemHubIndex
INTEGER,
basicFemType
INTEGER,
basicFemLinkStatus
INTEGER,
basicFemDuplexStatus
INTEGER,
basicFemBackPressureStatus
INTEGER,
basicFemForwardingMode
INTEGER,
basicFemSpeed
INTEGER,
basicFemName
DisplayString
}
basicFemHubIndex OBJECT-TYPE
the microcode from the TFTP
server.
Get the IP information from the
BootP server, and then download
the microcode from the TFTP
server. After the download has
been completed, upgrade the
microcode in system flash ROM."
9600-baud(9600),
19200-baud(19200),
38400-baud(38400)
}
The group index