Snmp Configuration; Snmp Configuration Panel - IBM 8237 Installation And User Manual

SNMP Configuration

Note: If you will be using an SNMP-based network management program to
manage your 8237 installation, you need to provide the appropriate information on
this panel and its lower level panels. If you will not be using an SNMP-based
network management application, you can ignore this section.
Selecting SNMP Configuration on the Main Menu causes the panel illustrated in
Figure 3-5 to be displayed.
Figure 3-5. SNMP Configuration Panel
Return to Previous Panel
Send Authentication Fail Trap
3-8
8237 Hub Installation and Planning Guide
SNMP Configuration
Return to Previous Panel
Send Authentication Fail Trap : YES
SNMP Communities ...
IP Trap Managers ...
IPX Trap Managers ...
Auto-Discovery Configuration ...
Use arrow keys to move. <Enter> to confirm
<Ctrl+T> to return to Main Menu
Return to the Main Menu.
This is a selection field. Possible values are YES (send a trap message
when SNMP authentication fails) or NO (do not send authentication
failure trap messages).