Hub Configuration Panel - IBM 8237 Installation And User Manual

Figure 3-12. Hub Configuration Panel
Return to Previous Panel
Hub ID
Position
Type
H/W Ver
Name
F/W Ver
Segment
Fan Status
If the unit is a Model 001, the SNMP and RMON management agent information is
replaced by NOT PRESENT. If the unit is a Model 002, the SNMP information is
displayed and the RMON information is replaced by NOT PRESENT.
3-16
8237 Hub Installation and Planning Guide
Hub Configuration - Model 003
Hub ID : 1
Type : IBM8237-003
Name :
Segment : 1
SNMP Agent :
Status : PRIMARY
Baudrate : 9600
Bootup Option : NORMAL
RMON Probe Module:
H/W Ver : 1
Segment : 1
Use arrow keys to move. <Enter> to confirm
<Ctrl+T> to return to Main Menu
Return to the Hub Configuration: Hub Selection panel.
This field displays the hub ID number.
This field displays the 8237's position in the stack in top-down order.
This field displays the hub model (for example, IBM8237-003).
This field displays the hardware level of this 8237.
This field is where you can enter a name by which this hub is to be
identified.
This field displays the level of the downloadable flash code in this 8237.
This field allows you to enter values that assign the 8237 to a backplane
segment (1, 2, or 3) or to isolate it from the stack (0).
This field displays the status of the cooling fan, either GOOD or FAIL.
Return to Previous Panel
Position
H/W Ver
F/W Ver
Fan Status : GOOD
ROM Ver
MAC Address: 00-60-94-E2-00-5D
F/W Ver
ROM Ver
: 1
: 2
: 1.00
: 1.00
: 1
: 1