Table of Contents
Advertisement
Solid-state drive (SSD)
Description
SSD
1 TB, Z Turbo Drive
256 GB, Z Turbo Drive
512 GB, Z Turbo Drive
1 TB, SATA, TLC
256 GB, SATA, TLC
512 GB, PCIe, SS, NVMe, TLC
512 GB, PCIe, NVMe, Self-encrypting drive (SED), Opal 2, TLC
512 GB, SATA-3, FIPS-140–2, TLC
2 TB, PCIe, NVMe, TLC
256 GB, PCIe, SATA-3, SED, Opal2, TLC
256 GB, PCIe, NVMe, TLC
256 GB, NVMe SED, Opal 2, TLC
16 GB, IO
NOTE:
An additional SSD slot is available on top of the system board. That slot is a customer self-repair
part.
Before removing the solid-state drive, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
5.
Remove the battery (see
6.
Remove the memory modules (see
7.
Remove the ODD (see
8.
Remove the SSDs (see
9.
Remove the middle cover (see
10.
Remove the fans (see
11.
Remove the system board (see
Remove the solid-state drive:
1.
Remove the Phillips M2.0×2.0 screw (1) that secures the drive to the system board.
84
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Service door on page
Battery on page
43).
Memory modules on page
ODD on page
48).
Solid-state drive (SSD) on page
Middle cover on page
Fans on page
70).
System board on page
41).
51).
46).
61).
72).
Spare part number
L28490-001
L28491-001
L28492-001
L30762-001
L30763-001
L28488-001
L28487-001
L28489-001
L28486-001
L28485-001
L28484-001
L28483-001
L28481-001
Advertisement
Table of Contents
Troubleshooting
