Table of Contents
Advertisement
WWAN module
The WLAN module and WWAN module are not interchangeable.
The WWAN module is available on select models only.
Description
Macan ME906S LTE with GPS M.2
HP IT4210 LTE/HSPA+ with GPS M.2
Before removing the WWAN module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
5.
Remove the battery (see
NOTE:
The red WWAN antenna cable is connected to the WWAN module 'Main' terminal. The blue WWAN
antenna cable is connected to the WWAN module 'Aux' terminal.
Remove the WWAN module:
1.
Position the computer upside-down.
2.
Remove the plastic cover (1) protecting the WWAN card.
3.
Disconnect the WWAN antenna cables (2) from the terminals on the WWAN module.
4.
Remove the Phillips M2.0×2.0 screw (3) that secures the WWAN module to the computer. (The edge of
the module opposite the slot rises away from the computer.)
54
Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Service door on page
Battery on page
43).
41).
Spare part number
845710-003
L15398-001
Advertisement
Table of Contents
Troubleshooting
