Middle Cover - HP ZBook 17 G5 Maintenance And Service Manual

Middle cover

Description
Middle cover
Before removing the middle cover, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the any smart cards and memory cards.
5. Remove the bottom cover (see
6. Remove the battery (see
7. Remove the memory modules (see
8. Remove the ODD (see
9. Remove the SSDs (see
Remove the middle cover:
1. Remove the 3 M2*2.5 Phillips head screws (1) in the ODD area.
2. Remove the M2*8 Phillips head screws (2).
3. Loosen the 4 Torx head screws (3) at the front.
4. Remove the 10 M2.5*8 Torx head screws (4).
Service door on page
Battery on page 43).
Memory modules on page
ODD on page 48).
Solid-state drive (SSD) on page
41).
51).
46).
Component replacement procedures
Spare part number
L28471-001
61