Msata Solid-State Drive (Ssd) - HP Pavilion 13 x2 Maintenance And Service Manual

mSATA Solid-State drive (SSD)

Description
64-GB mSATA SSD drive
128-GB mSATA SSD drive, TLC
128-GB mSATA SSD drive, MLC, for use in Intel models
128-GB mSATA SSD drive, MLC, for use in AMD models
Before removing the mSATA drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Disconnect the tablet from the keyboard dock (see
on page
5. Remove the display rear cover (see
6. Disconnect the battery cable (see
Remove the mSATA drive:
1. Remove the Phillips PM2.5×3.0 screw (1) that secures the drive to the tablet.
2. Lift the drive to a 45-degree angle, and then pull it away to remove it from the socket (2).
Reverse this procedure to install the mSATA drive.
30).
Releasing the tablet from the keyboard dock
Display rear cover on page
Battery cable on page 44).
Spare part number
732293-001
732294-001
747229-001
747230-001
43).
Tablet components 51