Hyundai IONIQ 5 Owner's Manual page 211

Hide thumbs Also See for IONIQ 5:
Table of Contents

Advertisement

The Two Press Unlock Feature can also be
enabled or disabled by pressing the door
lock and unlock buttons simultaneously
on the Key FOB:
Press and hold both the DOOR LOCK
button and the DOOR UNLOCK button
simultaneously until the hazard warning
lights blink.
This will enable or disable the Two Press
Unlock feature. Repeat this procedure to
enable/disable the mode again.
Information
• The side view mirror will unfold if
'Enable on Door Unlock' is selected
from the Settings menu in the
infotainment system screen.
Select:
- Settings > Vehicle Settings >
Convenience> Welcome Mirror >
Enable on Door Unlock
• The door handle touch sensor will only
operate when the smart key is within
28~40 in. (0.7~1 m) from the outside
door handle.
• The doors may lock or unlock if the
touch sensor of the outer door handle is
recognized while washing your car or
due to heavy rain.
• To prevent unintentional door lock or
unlock:
Press the lock button on the smart key
and immediately press the unlock
button along with the lock button for
more than 4 seconds. The hazard
warning lights will blink four times. At
this time, the doors will not lock or
unlock even though the touch sensor is
touched on the outside door handle.
To deactivate the function, press the
door lock or unlock button on the smart
key.
• The doors may not lock or unlock in the
following situations.
- If the touch sensor is touched with
gloves on
- If the door is suddenly approached
• The infotainment system may change
after software updates. For more
information, refer to the user`s manual
provided in the infotainment system
and the quick reference guide.
Information
During a car wash or rain, in order to
minimize unintentional operation of the
touch sensor, the touch sensor may
become insensitive. This is not a
malfunction.
Opening the liftgate
To open the liftgate:
1. Make sure you have the smart key in
your possession.
2. Press the liftgate open/close button (3)
on the vehicle or press and hold the
Liftgate handle switch on the smart key
for more than one second. The hazard
warning lights will blink two times and
the liftgate will open.
Information
The liftgate open/close button will only
operate when the smart key is within 28
in. (0.7 m) from the liftgate.
5
5-7

Advertisement

Table of Contents
loading

Table of Contents