Hyundai IONIQ 5 Owner's Manual page 50

Hide thumbs Also See for IONIQ 5:

Table of Contents

Foreword / Starting Your Electric Vehicle

If you use a DC charger when the vehicle is already fully charged, some DC chargers will

send out an error message. When the vehicle is fully charged, do not charge the vehicle.

How to Connect DC Charger

1. Depress the brake pedal and apply the parking brake.

2. Turn OFF all switches, shift to P (Park), and turn OFF the vehicle.

3. Open the charging door.

For more details, refer to 'Electric Charging Door' in this chapter.

If you cannot open the charging door due to freezing weather, tap lightly or remove any

ice near the charging door. Do not try to forcibly open the charging door.

4. Check whether there is dust or foreign substances inside the charging connector and

charging inlet.

5. Hold the charging connector handle and connect it to the vehicle charging inlet. Push

the connector all the way in. If the charging connector and charging terminal are not

connected properly, this may cause a fire.

Refer to the manual for each type of DC charger for how to charge and remove the

Chapters

Table of Contents