Hyundai IONIQ 5 Owner's Manual page 312

Convenience Features
Windshield Defrosting
And Defogging
WARNING
Windshield heating
Do not use the position during
cooling operation in extremely humid
weather. The difference between the
temperature of the outside air and that of
the windshield could cause the outer
surface of the windshield to fog up,
causing loss of visibility could cause an
accident resulting in serious injury or
death. In this case, set the mode selection
to the position and fan speed control
to a lower speed.
• For maximum defrost performance, set
the temperature control to the highest
temperature setting and the fan speed
control to the highest setting.
• If warm air to the floor is desired while
defrosting or defogging, set the mode
to the floor-defrost position.
• Before driving, clear all snow and ice
from the windshield, rear window, side
view mirrors, and all side windows.
• Clear all snow and ice from the hood
and air inlet in the cowl grill to improve
heater and defroster efficiency and to
reduce the probability of fogging up the
inside of the windshield.
5-108
To Defog Inside Windshield
ONE1051112
1. Select the desired fan speed.
2. Select the desired temperature.
3. Touch the defroster icon (
4. When the defogging logic is enabled,
Fresh mode is selected and air
conditioning is selected according to
outside temperature.
Check to make sure the air intake control
is in Fresh mode. If the air intake control
indicator light is illuminated, touch the
icon once to enable Fresh mode
(indicator light OFF).
If the position is selected, the fan
speed is automatically increased.
).