Renfert EASY view+ 3D Frequently Asked Questions Manual page 10

Question
en
In what format are the videos stored?
Are the video sequences also recorded with
sound?
Connection to additional output devices (TV / projector / 2nd monitor / etc.)
What type of monitor can I additionally con-
nect to the EASY view+ 3D system? Can
all Full HD / Ultra HD / 4K TVs common on
the market be used as an additional output
devices – for training and presentations, for
example?
Is it possible to connect to the EASY view+
3D directly to a PC or notebook?
Continuous operating mode for trade fairs, training courses, and presentations
Is there a "continuous operating mode" for
trade fairs or presentations so that the EASY
view+ 3D does not switch to standby mode
during extended breaks?
What screen size does the monitor have?
How sensitive is the monitor to metal, plas-
tic, plaster particles and dust in the air?
How do you best clean the screen?
Are there any software updates and how will
I be informed?
Video format MPEG-4 --> file extension .mp4
Adding sound to video is possible using the headset included with the
HDMI video recorder.
With the EASY view+ 3D HDMI splitter (optional accessory), a 3D or 2D
video signal can be sent to a second Renfert 2D/3D monitor. The signal is
multiplied but remains unchanged. This can be used for training purposes,
for example. For this purpose, the head is connected at the input of the
HDMI splitter and one monitor is connected to each of the two outputs.
When using a standard PC monitor, only a 2D display is possible.
Important:
EASY view+ Converter 3D/2D (optional accessory) is required for
output to other 2D playback devices (not monitors) such as TV sets
and projectors.
Renfert tested numerous TV sets (Full-HD/UHD/4K) in conjunction with
the EASY view+ Converter 3D/2D and the playback image quality of all
devices was rated as good to very good.
TV sets with Ultra HD or 4K picture quality can usually process the Full HD
picture signal of the EASY view+ 3D without any problems, but Renfert re-
commends that you always check the operating manual of the respective
TV set to be on the safe side.
Accessing the USB stick via network
No.
In order to be able to access the images of the USB stick in the head of
the EASY view+ 3D via the network, an IP address must be generated via
the connection with a router or switch. To this end, a network cable (not
included in the scope of delivery) must be plugged into the free network
cable socket of the EASY view+ 3D and connected with a router or switch.
Access is possible using free FTP transfer programs (for example,
FileZilla), or directly via Windows Explorer or the Apple browser, Safari.
Yes.
To switch to "continuous operating mode," proceed as follows:
While holding down the left mouse button and holding down the mouse
wheel, move the mouse and switch on the head, holding both down and
moving until "standby disabled" is displayed on the lower right edge of the
monitor (can take up to 20 sec.). If you switch off the head, this mode is
automatically exited.
EASY view+ 3D monitor
21.5 inches; 460 x 270 mm
The monitor is suitable for usual, typical laboratory dust levels at a dental
technician workstation and was extensively tested in this environment.
With a dry cloth; Renfert recommends a soft microfiber cloth.
EASY view+ 3D Software Updates
The EASY view+ 3D comes with an information card that asks every cus-
tomer to register. After registration, the customer will be automatically in-
formed about software updates by e-mail. In addition, you can always find
the latest software version for download on the Renfert homepage.
- 4 -
Answer