Renfert Waxlectric I Instruction Manual
Hide thumbs
Also See for Waxlectric I:
- Manual (189 pages) ,
- Instructions for use manual (158 pages) ,
- Translation of the original instructions for use (140 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Renfert Waxlectric I
Summary of Contents for Renfert Waxlectric I
- Page 1 Waxlectric I + II Nr. 2156 / 2157 Ideas for dental technology...
-
Page 6: Application Area
2.1 Ambient Conditions in Accor- dance with DIN EN 61010 We are pleased with your decision to purchase the Waxlectric I or Waxlectric II. This device The unit may only be operated: sets a new standard with regard to functionality, •... -
Page 7: Installation & Commissioning
3.3 Liability Exclusion Only intended for indoor use. Renfert GmbH shall be absolved from all claims for damages or warranty if: • The product is employed for any purpo- Observe the operating instructions. ses other than those cited in the operating instructions;... -
Page 8: Operation
5. Operation 5.4 Temperature Adjustment The modelling tip temperature is set by means 5.1 Operating Elements (Figure 7) of the two keys on the temperature adjustment. A On-off switch key: Increases the temperature Left channel B Saved temperature displayr - key: Decreases the temperature. C 3-digit temperature display The most recently set temperature is saved and D Temperature adjustment... - Page 9 (time savings of up to 30%!) can be • Press achieved by pre-warming the wax in pressed. a Renfert Vario E. Wax can be pro- • Press the on-off switch and keep it pressed. cessed more gently and cools more Once the unit of temperature is displayed rapidly.
-
Page 10: Cleaning & Maintenance
13). exception of components subject to normal • Install a new cork sleeve, making sure it is wear, Renfert warrants the all components of straight (Figure 14). the Waxlectric for a period of 3 years. • Screw the tip back on (Figure 1). -
Page 11: Technical Specifications
No. 2151-1500 Kit of holders Waxlectric No. 2155-0101 1 probe, small 10. Technical Specifications No. 2155-0102 1 probe, medium Max. power consumption: 5 W (Waxlectric I) No. 2155-0103 1 probe, large 10 W (Waxlectric II) No. 2155-0104 1 blade, narrow Min. -
Page 12: Troubleshooting
14. Troubleshooting Error Possible cause Corrective action Display does not • Control unit not switched on. • Switch the control unit on at key A. go on, unit does • Power supply interrupted. not operate. • Check the power supply and reconnect, •...
Need help?
Do you have a question about the Waxlectric I and is the answer not in the manual?
Questions and answers