Philips 3100 CMF-AMF-OTC Service Manual page 44

IMPORTANT NOTE: to execute the Steam-Out procedure the
PHI 3100
DREGDRAWER must be in place and the DOOR must be closed.
IMPORTANT NOTE: to execute the Steam-Out procedure the
If these 2 conditions are not respected a warning message
DREGDRAWER must be in place and the DOOR must be closed.
on the display and the Steam-Out is interrupted.
If these 2 conditions are not respected a warning message
IMPORTANT NOTE: to execute the Steam-Out procedure the DREG-
on the display and the Steam-Out is interrupted.
DRAWER must be in place and the DOOR must be closed. If these 2
conditions are not respected a warning message is shown on the display
and the Steam-Out is interrupted.
The machine starts the Steam Out and the display change t
backlight (yellow) and appears the indication "ON".
The machine starts the Steam Out and the display change t
While the Steam Out runs the Electro valve is opened an
backlight (yellow) and appears the indication "ON".
The machine starts the Steam Out and the display change the backlight
comes out the Water/Steam pipe.
While the Steam Out runs the Electro valve is opened an
(yellow) and appears the indication "ON". While the Steam Out runs the
comes out the Water/Steam pipe.
Electro valve is opened and water comes out the Water/Steam pipe.
When the Steam Out is complete the message "COMPLETE" is
shown on the Display.The Electro valves automatically clo
When the Steam Out is complete the message "COMPLETE" is
When the Steam Out is complete the message "COMPLETE" is shown on
machine can be switched o .
shown on the Display.The Electro valves automatically clo
the Display.The Electro valves automatically closes and the machine can
machine can be switched o .
be switched off.
When the Steam-Out is complete the following parameters are reset to their default values:
• Length Espresso product
• Length Espresso Lungo product
• Length Cappuccino (Coffee + Milk product)
• Length Milk product
• Stand-By Time
01
• Coffee Ground (number of grounds in dreg drawer)
01
revNum
• The request for Priming the Circuit at the first switch on is set.
revNum
• Brewing Unit Empty
• Aroma
• Aroma Impulses
• Filter Presence
• Filter Pulses
• Last error log
• Dynamic threshold
• History of grindings for Beans Presence detection
sensor must work correctly; if some errors occurs on Ntc during t
steam-out, the procedure can't continue and an error me
shown on the display.
IMPORTANT NOTE: to execute the Steam-Out procedure the
DREGDRAWER must be in place and the DOOR must be closed.
If these 2 conditions are not respected a warning message
on the display and the Steam-Out is interrupted.
The machine starts the Steam Out and the display change t
backlight (yellow) and appears the indication "ON".
While the Steam Out runs the Electro valve is opened an
comes out the Water/Steam pipe.
When the Steam Out is complete the message "COMPLETE" is
shown on the Display.The Electro valves automatically clo
machine can be switched o .
E. Urgese
01 E. Urgese
E. Urgese
Author
revNum Author
Author
ssage is
is shown
is shown
is shown
he
he
d water
he
d water
d water
ses and the
ses and the
ses and the
(Default 170 impulses coffee & 34sec milk)
Veri ed Approved
Veri ed
Veri ed Approved
he
05 SERVICE MODE
(Default 145 impulses)
(Default 345 impulses)
(Default 34 seconds)
(Default 15 minutes)
23/04/2015
23/04/2015
23/04/2015
SaveDate
Approved SaveDate
SaveDate
(Default 3 beans)
(Default 90 impulses)
2/4
2/4
(Default 0)
2/4
Pagina/pagine
Pagina/pagine
Pagina/pagine
(Default OFF)
(Default 0)
(Default 0)
(Default 30)
8/9