Table of Contents
Advertisement
PHI 3100
1.2 Page 1 (KEYBOARD)
Start condition
Only when a button is pressed a O appears on the relative position of
button pressed.
In the middle of display appears the name of the button pressed.
Pressing buttons on the left the backlight color changes from GREEN to
YELLOW.
Pressing button on the right the backlight color changes from GREEN to
RED.
When a button is pressed, also the Stand-By led (RED) turn ON.
Note: Press button Z7 as the last once, since it makes change the test
page.
Note: If 2 or more buttons are pressed the name that appears on display
could be wrong.
ERROR: If nothing appears on display; check the interface board and the
flat cable (JP21).
ERROR: If during the movement the backlight remain green check the
wiring (JP1) from the interface board and the display.
ERROR: The name displayed is wrong; check the position of jumper in
interface. It must be the same of machine model:
• Jumper on JP7 for Focus machine model
• Jumper on JP6 for Class machine model
• Jumper on JP5 for Top machine model
The machine passes to the level 2 (INPUTS)
1.3 Page 2 (INPUTS)
Start condition
1.2 Page 1 (KEYBOARD)
1.2 Page 1 (KEYBOARD)
Start condition
Start condition
1.2 Page 1 (KEYBOARD)
Start condition
Press buttons from 1 to 7
Only when a button is pressed a O appears on the relat
Only when a button is pressed a O appears on the relat
1.2 Page 1 (KEYBOARD)
position of button pressed.
position of button pressed.
In the middle of display appears the name of the button
Start condition
In the middle of display appears the name of the button
Only when a button is pressed a O appears on the relat
pressed.
pressed.
position of button pressed.
Pressing buttons on the left the backlight color changes fr
Pressing buttons on the left the backlight color changes fr
In the middle of display appears the name of the button
GREEN to YELLOW.
GREEN to YELLOW.
pressed.
Pressing button on the right the backlight color changes f
Pressing button on the right the backlight color changes f
Pressing buttons on the left the backlight color changes fr
GREEN to RED.
GREEN to YELLOW.
GREEN to RED.
When a button is pressed, also the Stand-By led (RED) tur
Pressing button on the right the backlight color changes f
When a button is pressed, also the Stand-By led (RED) tur
ON.
GREEN to RED.
ON.
When a button is pressed, also the Stand-By led (RED) tur
Note: Press button Z7 as the last once, since it makes change
ON.
Note: Press button Z7 as the last once, since it makes change
the test page.
the test page.
Note: If 2 or more buttons are pressed the name that appears
Note: Press button Z7 as the last once, since it makes change
Note: If 2 or more buttons are pressed the name that appears
on display could be wrong.
the test page.
Only when a button is pressed a O appears on the relat
on display could be wrong.
Note: If 2 or more buttons are pressed the name that appears
position of button pressed.
on display could be wrong.
In the middle of display appears the name of the button
pressed.
Pressing buttons on the left the backlight color changes fr
GREEN to YELLOW.
Pressing button on the right the backlight color changes f
ERROR: If nothing appears on display; check the interface
GREEN to RED.
ERROR: If nothing appears on display; check the interface
board and the at cable (JP21).
board and the at cable (JP21).
When a button is pressed, also the Stand-By led (RED) tur
ERROR: If nothing appears on display; check the interface
ERROR: If during the movement the backlight remain gree
ERROR: If during the movement the backlight remain gree
ON.
board and the at cable (JP21).
check the wiring (JP1) from the interface board and the
check the wiring (JP1) from the interface board and the
ERROR: If during the movement the backlight remain gree
display.
display.
Note: Press button Z7 as the last once, since it makes change
check the wiring (JP1) from the interface board and the
ERROR: The name displayed is wrong; check the position of
ERROR: The name displayed is wrong; check the position of
the test page.
display.
jumper in interface. It must be the same of machine model:
jumper in interface. It must be the same of machine model:
Note: If 2 or more buttons are pressed the name that appears
ERROR: The name displayed is wrong; check the position of
•
•
Jumper on JP7 for Focus machine model
Jumper on JP7 for Focus machine model
jumper in interface. It must be the same of machine model:
on display could be wrong.
•
Jumper on JP6 for Class machine model
•
Jumper on JP6 for Class machine model
•
Jumper on JP7 for Focus machine model
•
•
Jumper on JP5 for Top machine model
Jumper on JP5 for Top machine model
•
Jumper on JP6 for Class machine model
•
Jumper on JP5 for Top machine model
The machine passes to the level 2 (
The machine passes to the level 2 (
The machine passes to the level 2 (
ERROR: If nothing appears on display; check the interface
board and the at cable (JP21).
ERROR: If during the movement the backlight remain gree
check the wiring (JP1) from the interface board and the
display.
ERROR: The name displayed is wrong; check the position of
jumper in interface. It must be the same of machine model:
•
Jumper on JP7 for Focus machine model
01
E. Urgese
Press the Z7 button
01
E. Urgese
01
E. Urgese
•
Jumper on JP6 for Class machine model
revNum
Author
revNum
Author
revNum
Author
•
Jumper on JP5 for Top machine model
The machine passes to the level 2 (
01
E. Urgese
revNum
Author
1.3 Page 2 (INPUTS)
Start condition
The indication H20 changes from "N" to "Y".
NOTE: the switching from "N" to "Y" requires about 1-2
ERROR: The indication TANK-H2O doesn't change; check the
capacitive sensor ( xing) and the wiring (JP23)
The indications BU -P changes from "N" to "Y".
NOTE: removing the BrewUnit the indication from "Y" to "
Test Mode Philips 3100
Test Mode Philips 3100
Test Mode Philips 3100
Test Mode Philips 3100
Press buttons from 1 to 7
Press buttons from 1 to 7
ive
ive
Press buttons from 1 to 7
ive
om
om
rom
rom
om
n
rom
n
n
Press buttons from 1 to 7
ive
om
rom
n
n
n
n
Press the Z7 button
Press the Z7 button
INPUTS )
INPUTS )
Press the Z7 button
INPUTS )
n
Veri ed
Approved
Veri ed
Approved
Veri ed
Approved
Press the Z7 button
INPUTS )
Test Mode Philips 3100
Veri ed
Approved
Insert a full W ater T ank
seconds.
Insert the BrewUnit
N"
05 SERVICE MODE
Filename
Filename
20150423_Philips3100_TestMode_v01
20150423_Philips3100_TestMode_v01
Filename
20150423_Philips3100_TestMode_v01
Filename
20150423_Philips3100_TestMode_v01
23/04/2015
5/14
23/04/2015
5/14
23/04/2015
5/14
SaveDate
P/PP
SaveDate
P/PP
SaveDate
P/PP
Filename
23/04/2015
5/14
20150423_Philips3100_TestMode_v01
SaveDate
P/PP
3/9
Advertisement
Table of Contents
