Table of Contents
Advertisement
PHI 3100
2.2.
Machine parameters and performance
PRODUCT
QUANTITY
Espresso
Espresso lungo
Hot water
Steam
pannarello
(frother)
Hard-
Water hardness
ness
1
Soft (up to 7°dH)
2
Medium (7° - 14°dH)
3
Hard (15° - 21°dH)
4
Very hard (over 21°dH)
The default water hardness level is 4. Each litre of water corresponds to approximately
2,000 pulses.
In the machines where is not possible change the water hardness the default
hardness level is 3.
DREG DRAWER
Time-out for dreg drawer
Reset dreg counter
Inlet time (default)
Inlet time programmed by Production/Ser-
Boiler temperature during Standby
Water reserve (pulses) with water filter
Water reserve (pulses) with no water filter
Water reserve modifiable by Production/Service
Default quantity
(Grams)
40 +/- 10gr
120 +/- 10%
Continues until the water supply has been exhausted (capacitive sensor)
Continues until the water supply has been exhausted (capacitive sensor)
Descaling cycle frequency
240 litres (480,000 pulses)
120 litres (240,000 pulses)
60 litres (120,000 pulses)
STANDBY
vice
WATER TANK
departments
"Fill tank" alarm
"No tray" alarm
Water mains
programmable
Without water filter
30 litres (60,000 pulses)
Dreg emptying alarm, if the dreg drawer is
removed for more than 5 seconds.
02 TECHNICAL SPECIFICATION
Programm. by
User
Production /
Yes
Yes
With water filter
480 litres (960,000 pulses)
240 litres (480,000 pulses)
120 litres (240,000 pulses)
60 litres (120,000 pulses)
Description and values
5 sec.
Description and values
15 minutes
Yes
Boiler OFF
Description
200
200
No
Yes
Yes (Fill tank)
No
Service
No
No
2/5
Advertisement
Table of Contents
