Philips 3100 CMF-AMF-OTC Service Manual page 23

PHI 3100
Warning Signals (Yellow Colour)
The machine is warming up.
The machine is performing the
STOP
rinse cycle. Wait until the machine
has completed the cycle.
The
"INTENZA+" water fi lter to be
replaced.
You need to descale the machine. Press the "
process. Follow the steps described in the "Descaling" chapter of this manual.
START ESC
If you want to descale the machine later, press the " " button to continue using the
machine. Please note that not descaling your machine will ultimately make it stop
CALC CLEAN
working properly. In this case, repair is NOT covered under your warranty.
Warning Signals (Red Colour)
Completely insert the drip tray with the coff ee grounds drawer into the machine and close
the service door.
Fill the coffee bean hopper.
The brew group must be inserted
into the machine.
The machine is out of order. The error code is displayed in the right bottom corner. For
error codes 1 -3 - 4 - 5. For any other error codes, follow the instructions below: Turn off
the machine. Turn it back on after 30 seconds. Try this 2 or 3 times. If the machine does
not start, contact the Philips hotline in your country and quote the error code shown on the
Exx
display. Contact details can be found in the warranty booklet packed separately or at www.
philips.com/support.
machine needs the
START
03 BRIEF INSTRUCTIONS
The brew group is being reset
due to machine reset.
Fill the coff ee bean hopper with
coff ee beans and restart the
cycle.
Prime the water circuit.
" button to start the descaling
Empty the coff ee grounds
drawer. Wait 5 seconds before
reinserting it.
Fill the water tank.
6/9