Philips 3100 CMF-AMF-OTC Service Manual page 41

PHI 3100
ERROR: The indication WORK doesn't change and remain "N", the display
backlight changes from green to red; Check the work microswitch (bro-
ken?), the BU motor (blocked?) and the wiring (JP16).
ERROR: (Without BU) The absorbed current is more than 200mA, the
display backlight changes from green to red; check the BU and the motor.
ERROR: (With BU)The absorbed current is more than 300mA, the display
backlight changes from green to red; check the BU and the motor
When the BU reaches the home position the indication HOME changes
from "N" to "Y", the number of the current is less than 200mA (without
BU) or 300mA (with BU).
ERROR: The indication HOME doesn't change and remain "N", the display
backlight changes from green to red; Check the work microswitch (is bro-
ken), the BU motor (is blocked) and the wiring
(JP16).
ERROR: (Without BU) The absorbed current is higher than 200mA, the
display backlight changes from green to red; check the BU and the motor.
ERROR: (With BU)The absorbed current is higher than 300mA, the dis-
play backlight changes from green to red; check the BU and the motor
The machine passes to the Page 4 (EV - PUMP)
1.5 Page 4 (EV - PUMP)
Start condition
When the BU reaches the work position the indication
When the BU reaches the work position the indication
When the BU reaches the work position the indication
changes from "N" to "Y", the number of the current is less
changes from "N" to "Y", the number of the current is less
changes from "N" to "Y", the number of the current is less
200mA (without BU) or 300mA (with BU).
200mA (without BU) or 300mA (with BU).
200mA (without BU) or 300mA (with BU).
ERROR: The indication
ERROR: The indication
ERROR: The indication
display backlight changes from green to red; Check the wo
display backlight changes from green to red; Check the wo
display backlight changes from green to red; Check the wo
microswitch (broken?), the BU motor (blocked?) and the wi
microswitch (broken?), the BU motor (blocked?) and the wi
microswitch (broken?), the BU motor (blocked?) and the wi
(JP16).
(JP16).
(JP16).
ERROR: ( Without BU ) The absorbed current is more than 200mA,
ERROR: ( Without BU ) The absorbed current is more than 200mA,
ERROR: ( Without BU ) The absorbed current is more than 200mA,
the display backlight changes from green to red; check the
the display backlight changes from green to red; check the
the display backlight changes from green to red; check the
the motor.
the motor.
the motor.
ERROR: ( With BU )The absorbed current is more than 300mA, the
ERROR: ( With BU )The absorbed current is more than 300mA, the
ERROR: ( With BU )The absorbed current is more than 300mA, the
display backlight changes from green to red; check the BU a
display backlight changes from green to red; check the BU a
display backlight changes from green to red; check the BU a
motor
motor
motor
Press the Z3 button to move the BU to Home
01
01
When the BU reaches the home position the indication
01
When the BU reaches the home position the indication When the BU reaches the home position the indication When the BU reaches the home position the indication
When the BU reaches the home position the indication revNum
revNum
changes from "N" to "Y", the number of the current is less
revNum
changes from "N" to "Y", the number of the current is less changes from "N" to "Y", the number of the current is less changes from "N" to "Y", the number of the current is less
changes from "N" to "Y", the number of the current is less
200mA (without BU) or 300mA (with BU).
200mA (without BU) or 300mA (with BU). 200mA (without BU) or 300mA (with BU). 200mA (without BU) or 300mA (with BU).
200mA (without BU) or 300mA (with BU).
ERROR: The indication
ERROR: The indication ERROR: The indication ERROR: The indication
ERROR: The indication
display backlight changes from green to red; Check the wo
display backlight changes from green to red; Check the wo display backlight changes from green to red; Check the wo display backlight changes from green to red; Check the wo
display backlight changes from green to red; Check the wo
microswitch (is broken), the BU motor (is blocked) and the
microswitch (is broken), the BU motor (is blocked) and the microswitch (is broken), the BU motor (is blocked) and the microswitch (is broken), the BU motor (is blocked) and the
microswitch (is broken), the BU motor (is blocked) and the
(JP16).
(JP16). (JP16). (JP16).
(JP16).
ERROR: ( Without BU ) The absorbed current is higher than
ERROR: ( Without BU ) The absorbed current is higher than ERROR: ( Without BU ) The absorbed current is higher than ERROR: ( Without BU ) The absorbed current is higher than
ERROR: ( Without BU ) The absorbed current is higher than
200mA, the display backlight changes from green to red; ch
200mA, the display backlight changes from green to red; ch 200mA, the display backlight changes from green to red; ch 200mA, the display backlight changes from green to red; ch
200mA, the display backlight changes from green to red; ch
BU and the motor.
BU and the motor.
BU and the motor. BU and the motor.
BU and the motor.
ERROR: ( With BU )The absorbed current is higher than 300mA, the
ERROR: ( With BU )The absorbed current is higher than 300mA, the ERROR: ( With BU )The absorbed current is higher than 300mA, the ERROR: ( With BU )The absorbed current is higher than 300mA, the
ERROR: ( With BU )The absorbed current is higher than 300mA, the
display backlight changes from green to red; check the BU a
display backlight changes from green to red; check the BU a
display backlight changes from green to red; check the BU a display backlight changes from green to red; check the BU a
display backlight changes from green to red; check the BU a
motor
motor motor motor
motor
Press the Z7 button
The machine passes to the Page 4 (
The machine passes to the Page 4 ( The machine passes to the Page 4 ( The machine passes to the Page 4 (
The machine passes to the Page 4 (
1.5 Page 4 (EV - PUMP)
Start condition
01
01 01 01
01
revNum
revNum revNum revNum
revNum
IMPORTANT NOTE: If the DREGDRAWER is not inserted or the
DOOR is not closed the EV test cannot be performed. If th
inputs are not in the right position, a warning message
shown and the display turns to yellow.
It is possible to hear the "click" from Electro Valve. The
beside the EV1 changes from "OFF" to "ON".
WORK doesn't change and remain "N", the
WORK doesn't change and remain "N", the
WORK doesn't change and remain "N", the
Test Mode Philips 3100
Test Mode Philips 3100 Test Mode Philips 3100 Test Mode Philips 3100
Test Mode Philips 3100
Press the Z3 button to move the BU to Home
Press the Z3 button to move the BU to Home Press the Z3 button to move the BU to Home Press the Z3 button to move the BU to Home
E. Urgese
Press the Z3 button to move the BU to Home
E. Urgese
E. Urgese
Author Veri ed
Author Veri ed
Author Veri ed
HOME doesn't change and remain "N", the
HOME doesn't change and remain "N", the HOME doesn't change and remain "N", the HOME doesn't change and remain "N", the
HOME doesn't change and remain "N", the
Press the Z7 button
Press the Z7 button Press the Z7 button Press the Z7 button
Press the Z7 button
EV - PUMP )
EV - PUMP ) EV - PUMP ) EV - PUMP )
EV - PUMP )
Test Mode Philips 3100
E. Urgese
E. Urgese E. Urgese E. Urgese
E. Urgese
Author Veri ed
Author Author Author Veri ed Veri ed Veri ed
Author Veri ed
Press the Z1 button to open the Electro Valve
WORK
WORK
WORK
BU
than
BU
than
BU
than
05 SERVICE MODE
BU
rk
BU
rk
BU
rk
ring
ring
ring
BU
BU and
BU
BU and
BU
BU and
Filename
nd the
Filename Filename Filename
nd the Filename
nd the
20150423_Philips3100_TestMode_v01
20150423_Philips3100_TestMode_v01 20150423_Philips3100_TestMode_v01 20150423_Philips3100_TestMode_v01
20150423_Philips3100_TestMode_v01
23/04/2015
23/04/2015
HOME
23/04/2015
HOME HOME HOME
HOME Approved SaveDate
BU
Approved SaveDate
than
BU BU BU
Approved SaveDate
than than than
BU
than
BU
rk
BU BU BU
rk rk rk BU
rk
wiring
wiring wiring wiring
wiring
BU
eck the
BU BU BU
BU
eck the eck the eck the
eck the
BU
nd the
BU BU BU
nd the BU
nd the nd the
nd the
Filename
20150423_Philips3100_TestMode_v01
23/04/2015
23/04/2015 23/04/2015 23/04/2015
23/04/2015
Approved SaveDate
Approved Approved Approved SaveDate SaveDate SaveDate
Approved SaveDate
ese 2
will be
indication
7/14
7/14
7/14
P/PP
P/PP
P/PP
8/14
8/14 8/14 8/14
8/14
P/PP
P/PP P/PP P/PP
P/PP
5/9