Table of Contents
Advertisement
PHI 3100
The user can change the page by pressing the Z7 button.
Page 0 is accessible only entering Test Mode from power-off mode; at the start up all loads are
turned off.
1.1 Page 0 (FIRMWARE)
Firmware version on the display.
The machine model is shown ( FOCUS, CLASS or TOP).
The voltage of the main supply "230V"
The frequency of the main supply is shown (50 or 60 Hz)
ERROR: If in machine model field is written "Unknow" and backlight of
display is Yellow, check the jumper in interface.
The firmware version is the same as the label on MicroController
ERROR: The firmware version is different from the label on MicroControl-
ler; change the CPU_POWER Boards !
The machine passes to the Page 1 (KEYBOARD)
ERROR: The page does not change; Check the interface board
and the flat cable (JP21)
TEST MODE Level 0
Pressing button Z7
TEST MODE Level 1
Pressing button Z7
TEST MODE Level 2
Pressing button Z7
TEST MODE Level 3
Pressing button Z7
TEST MODE Level 4
Pressing button Z7
TEST MODE Level 5
1.1 Page 0 (FIRMWARE)
Verify the firmware version
Firmware version on the display.
1.1 Page 0 (FIRMWARE)
1.1 Page 0 (FIRMWARE)
The machine model is shown ( FOCUS, CLASS or TOP).
The voltage of the main supply "230V"
The frequency of the main supply is shown (50 or 60 Hz)
Firmware version on the display.
Firmware version on the display.
The machine model is shown ( FOCUS, CLASS or TOP).
The machine model is shown ( FOCUS, CLASS or TOP).
The voltage of the main supply "230V"
The voltage of the main supply "230V"
The frequency of the main supply is shown (50 or 60 Hz)
The frequency of the main supply is shown (50 or 60 Hz)
ERROR: If in machine model eld is written "Unknow" and
of display is Yellow, check the jumper in interface.
The rmware version is the same as the label on MicroCon
ERROR: If in machine model eld is written "Unknow" and
ERROR: If in machine model eld is written "Unknow" and
of display is Yellow, check the jumper in interface.
of display is Yellow, check the jumper in interface.
The rmware version is the same as the label on MicroCon
The rmware version is the same as the label on MicroCon
ERROR: The rmware version is di erent from the label
MicroController; change the CPU_POWER Boards !
ERROR: The rmware version is di erent from the label
The machine passes to the Page 1 (
ERROR: The rmware version is di erent from the label
MicroController; change the CPU_POWER Boards !
MicroController; change the CPU_POWER Boards !
Press the STAND_BY button
The machine passes to the Page 1 (
The machine passes to the Page 1 (
ERROR: The page does not change; Check the interface boa
and the at cable (JP21)
ERROR: The page does not change; Check the interface boa
ERROR: The page does not change; Check the interface boa
and the at cable (JP21)
and the at cable (JP21)
01
Pressing button Z7
Test Mode Philips 3100
Test Mode Philips 3100
Test Mode Philips 3100
Verify the rmware version
Verify the rmware version
Verify the rmware version
Press the STAND_BY
KEYBOARD
)
Press the STAND_BY
Press the STAND_BY
KEYBOARD
)
KEYBOARD
)
E. Urgese
05 SERVICE MODE
Filename
20150423_Philips3100_TestMode_v01
Filename
Filename
20150423_Philips3100_TestMode_v01
20150423_Philips3100_TestMode_v01
backlight
troller
backlight
backlight
troller
troller
on
button
on
on
button
button
rd
rd
rd
23/04/2015
2/9
4/14
Advertisement
Table of Contents
