Table of Contents
Advertisement
3.1.4. Traffic Logs Tab
The Traffic Logs tab allows users to monitor network ports events.
ProfiShark 100M / 1G / 1G+
Monitor link status, bandwidth usage and CRC error rate for ports A and B. For bandwidth usage and CRC
error rate, an entry is added every time the specified threshold is exceeded.
Link status
Logs link status events.
Bandwidth usage
Logs traffic events exceeding the set value. This value represents a percentage of the total bandwidth. For
instance, for 1 Gbps, a value of 5.5 will result in only logging traffic events exceeding 55 Mbps (1000 *
0.055).
CRC error %
Logs CRC error events exceeding the set value. This value represents a percentage of the traffic passing
through the port. For instance, a value of 5.5 will result in only logging traffic events with a CRC fault rate
exceeding 5.5% of the traffic passing through the port.
ProfiShark 10G / 10G+
Monitor SFP module detection, status bit changes, and warnings and alarms.
ProfiShark 1G+ / 10G+
Additional options for logging timing-specific events are available on this tab for the 1G+ and 10G+ models.
34
Advertisement
Table of Contents
