Table of Contents
Advertisement
2. Getting Started
2.1. ProfiShark Software Setup
2.1.1. Windows
To install the ProfiShark Manager on Windows, launch the setup utility located in the "\Windows\Installer\"
folder of the USB flash drive. Uninstall any previous version of the ProfiShark Manager before starting the
setup utility.
1. Allow the installation to proceed when prompted by Windows User Account Control, and follow the
on-screen instructions.
2. When prompted, disconnect and reconnect the ProfiShark.
3. Wait for the installation to complete.
4. Launch the ProfiShark Manager via the shortcut created in the start menu.
2.1.2. Linux
ProfiShark drivers and software can be installed using our repository located at https://ubuntu.profitap.com/.
Supported distributions:
● Ubuntu 20.04
● Ubuntu 22.04
● Kali Linux
● Debian 10
● Debian 11
● Debian 12
Use the following commands:
wget https://ubuntu.profitap.com/public.key
sudo apt-key add public.key
sudo add-apt-repository https://ubuntu.profitap.com/
sudo apt-get update
If the third step fails on Kali Linux, run the following alternative command:
sudo sh -c 'echo "deb https://ubuntu.profitap.com/ kali-rolling main" >>
/etc/apt/sources.list'
After these commands, you should be able to see all the available drivers, using:
apt-cache search profishark-linux
19
Advertisement
Table of Contents
