Table of Contents
Advertisement
3.1.3. SFP Tab
ProfiShark 10G / 10G+
The SFP Tab provides real-time information about the connected SFP+ modules, offering an overview of
their general capabilities and real-time sensors.
The Ports Control section allows switching between SPAN mode and In-Line mode by ticking or unticking
the Span Mode checkbox. In SPAN mode, traffic is only received, on either or both ports. In In-Line mode,
traffic is transmitted between both ports. A loopback option is available when SPAN mode is enabled. An
autonegotiation option is available for each port when the 1 Gbps firmware is active (see Features tab).
33
Advertisement
Table of Contents
