Logs; Remote Syslog; Device Reset; Soft Reset - ProfiTap IOTA 1G User Manual

Hide thumbs Also See for IOTA 1G:

Table of Contents

3.7. Logs

3.7.1. Logs

Click the System Logs button to download the system logs, which contains all of the embedded OS activity.

Click the Application Logs button to download the application logs, which contains the activity of the

IOTA-specific software.

This facility allows the IOTA to send its system and application logs to remote collection servers. For each

destination, it is possible to specify the type of logs priority and source to send.

To reset the password and network parameters, use the following procedure: while the device is

POWERED, press and hold the START/STOP/RESET button for 20 seconds. The procedure is complete

when the LEDs turn green.

To reset the IOTA to factory settings, use the following procedure: while the device is UNPOWERED, press

and hold the START/STOP/RESET button, connect the power cable, and keep holding the button until the

LEDs turn orange (~20 seconds). Release the button, and wait until the LEDs turn green (~5 minutes).

Note: Resetting the IOTA to factory settings will remove all data stored on the device. The software version

will return to the one installed during production, and thus may need to be updated.

Table of Contents

Iota 1g+Iota 10g