You should expect the following output:
Reboot the NAS and run the package.
2.1.5. ESXi
Currently, ESXi up to version 6.5 is supported.
Disable the new USB driver from VMware (see https://kb.vmware.com/s/article/2147650) with the following
SSH command:
esxcli system module set -m=vmkusb -e=FALSE
Reboot.
Install the VIB driver file by copying the .vib file from the ProfiShark USB key to the host and running the
following SSH command:
esxcli software vib install -v /net-profishark-xxxxxxxxx.vib
25