Using Instructions
Electronic Display
Function Description
Scan: automatically show each function parameter in sequence
Time: from 0 to 99: 59
Calorie: accumulating calorie consumption when exercising, only for reference, can
not be referred as medical parameter
Counting: accumulating the times of steps
The step speed rate in one minute
Mode: can select every function button, if pressing continuously for 3 seconds, all
parameters are zeroed and recounting again.
Important prompt: any input will start the display, press the mode button, four
functions can be selected(time/minute, time, calorie, automatic scan). The small arrow
on the display screen will display the function corresponding to the 4 arrows on the
display screen
Automatic scan: the display screen will automatically display time/minute, time,
calorie each for 4 seconds in one time under this state.
Automatic shutdown: if no signal is input continuously for 4 minutes, the display
screen will shut down automatically. Step exercise or touching the mode button will
input the signal again.
Need help?
Do you have a question about the A90-128 and is the answer not in the manual?