Pioneer VSX-9500S VSX-7500S Operating Instructions Manual page 47

TROUBLESHOOTING
TV source can't be seen when
the VCR's TV tuner is used. connections are faulty.
instructions for your VCR.
Video tape copies can't be made
with the VCR.
SPECIFICATIONS
© TV antenna is not connected to VCR, or
¢ You are attempting to watch a TV source using
a VCR with copy system connections.
in general, when copy system connections are
made, the VCR's TV tuner function ceases to
operate. For details, consult the operating
e Video tape copy connections haven't been made.
¢ Consult the VCR's operating instructions, and
connect antenna correctly.
¢ Disconnect the copy system connection.
* Look again closely at the section VIDEO
SYSTEM CONNECTIONS on page 9 and 36,
and connect correctly.
Amplifier section
[POWER AMP IN]
Continuous average power output of 125 watts*
per channel, min., at 8 ohms, from 20 Hz to 20,000
Hz with no more than 0.005 %** total harmonic
distortion (front); 30 watts* per channel, min., at
8 ohms, from 20 Hz to 20,000 Hz with no more
than 0.08 %** total harmonic distortion (rear); 30
watts*, min., at 8 ohms, from 20 Hz to 20,000 Hz
with no more than 0.08 %** total harmonic
distortion (center: VSX-9500S only).
Dynamic power (2 0/4 0/8 Q) ......ceeeeee ees 280 W/260 W/185 W
Audio section
Damping Factor
VIKELZ BO aes fies diecea adenine tee nowdoastaveate dive Sansedeaa Peacine daaney a 100
Input (Sensitivity/Impedance)
PHONOUMM orc cccecladeopatunnesnensactenebtcedaudlenscveaven 2.5 mV/47 kQ
CD, LINE, TAPE 1/DAT, TAPE 2, VIDEO, TV,
VDP/CDV, VCR 1, VCR 2, VCR 3... cece eee teen ee 150 mV/47 kQ
POWER-VAMBIN cnitictccseisveecsssnetues stestuitease stasis tienes 1 V/47 kQ
Phono Overload Level (T.H.D. 0.08 %, 1000 Hz)
PHONO: MM ivessvcicsiccss scvesiees nea osie eu chive dusictved essen euadess 150 mV
Frequency Response
PHONO MM... cece eeceeeeee teen eres 20 Hz to 20,000 Hz +0.3 dB
CO, LINE, TAPE 1/DAT, TAPE 2, VIDEO, TV,
VDP/CDV, VCR 1, VCR 2, VCR 3....... 5 Hz to 100,000 Hz*$ dB
Output (Level/Impedance)
TAPE 1/DAT REC, TAPE 2 REC, VCR 1 OUT,
* NCR 2 OUT aucinneiliineiiwn Sinise ivan sdeeed 150 mV/2.2 kQ
© SPRESAMP QUT vctsinss cessed cahaleoss%s dhetisdeicdoedieshsiweee 1 V/2202
* Loudness CONtOUr .......ccccceececeececeeceescceenecesaeeas +6 dB (100 Hz)
+3 dB (10 kHz)
Signal-to-Noise Ratio (!HF, short circuited, A network)
PHONO MM avsascecssccscecs code el det ccvud can veda nuvd deca dieniee esas 82 dB
CD, LINE, TAPE 1/DAT, TAPE 2, VIDEO, TV,
VDP/CDV, VCR 1, VCR 2, VCR 3 .... ccc cece cece ccseee eee ecneeues 98 dB
Signal-to-Noise Ratio [EIA, at 1 W (1 kHz)]
PHONO. MM sicchsvecs covecescotscstesscbeesackehessacaetludgcaceiedeesecae 77 dB
CD, LINE, TAPE 1/DAT, TAPE 2, VIDEO, TV,
VDP/CDV, VCR 1, VCR 2, VCR 3........csecceccseceecueeeeeeees 80 dB
VIDEO Section
Input (Sensitivity/Impedance)
VCR 1, VCR 2, VCR 3, VDP/CDV, TV, VIDEO,
ADAPTOR siieetisdideidinsaivecd eivaledead acrwehetigvees weds 1 Vp-p/75 Q
Output (Level/Impedance)
VCR 1, VCR 2, ADAPTOR, MONITOR ..............00065 1 Vp-p/75 Q
Frequency Responce
VCR 1, VCR 2, VCR 3, VDP/CDV, TV, VIDEO,
ADAPTOR MONITOR 5 Hz — 10 MHz*3 dB
Signal-to-Noise Ratio .........cccecccecesseeeeeeeeeea een ee nenaeeneee nee
Cross Talk
EMH SniCe? s.cc50ctsaccucttacedenc ci teeta Geceecvedes heey +3 dB (2 MHz)
{S terminals]
Input (Sensitivity/impedance)
VCR 1, VCR 2, VDP/CDV ........... Luminance signal: 1 Vp-p/75 Q
Color difference signal: 0.286 Vp-p/75 Q
Output (Level/impedance)
VCR 1, VCR 2, TO MONITOR TV. Luminance signal: 1 Vp-p/75 Q
Color difference signal: 0.286 Vp-p/75 2
Frequency response
Luminance signal................cceeeeeeeeee ee 10 Hz to 10 MHz, *3 dB
Signal-to-Noise Ratio
Luminance SIGMAl.........cccccee scene eect c ee ee eet eeee tena en ee nent eee nee 55 dB
Cross talk nicesscscetsesee snd cvancen deed avseabesceateediess 55 dB (3.58 MHz)
Surround section
Input (Sensitivity/Impedance)
REAR POWER AMB IN iii icticlan cigdebddetendesscedea avaedenae 1 V/47 kQ
CENTER POWER AMP IN 1 V/47 kQ
Output (Level/Impedance)
REAR PREAMP OUT sive icncaseisacccteesscuigennds p5e Coaineaddd 1 V/470 Q
CENTER PRE AMP OUT
NVSHQ5O0OS sass cescisecaeseasd ce teiee varachwn cians earqees caeane's 1 V/470 Q
VSX-7500S so scs cit sedenihecntareessbacsasietaqeaebeeg eee dalaee 2 V/470 0
47
<ARB1173>