Pioneer VSX-9500S VSX-7500S Operating Instructions Manual page 17

THE VIDEO SIGNAL SELECTOR
coo VCR
This function can be used to allow you to listen to the playback sound
while changing the video image only, thus allowing you to play back
and record video images different from the playback sound source. For
example, VCR 1 can record VCR 2 picture mixed with CD sound.
1. Connect the audio and video component to be used.
2. Press the POWER switch to the ON position, and turn on the power
to the other components used.
3. Set the INPUT SELECTOR switch to the audio source (CD, for
example).
* To select the tuner function, press the desired STATION CALL
switch if the station has been preset. If the desired station has
not been preset, tune in the station using Auto, Manual or Direct
tuning.
NOTE:
© Set the VCR 1 REC SEL switch to OFF.
[Video recording]
© Select a video signal source other than VCR 1.
"VIDEO TAPE COPYING: When using the enhancer function."
8. Release the recording pause mode of the recording VCR (VCR 1,
for example)
CAUTION:
17
<ARB1173>