Pioneer VSX-9500S VSX-7500S Operating Instructions Manual page 11

CONNECTION CHART
VSX-9500S Speakers Connections NOTE:
. De not allow any of the cord's conductors to protrude
le iagram
(Comp teD agra ) from the terminals or touch any other conductors.
Malfunctioning or breakdowns may occur when
conductors come into contact with each other.
* |liustration shows U.S. model.
@ Loosen cap.
@ Insert wire.
@ Tighten cap.
Center speaker impedance
Connect center speaker system with a nominal
impedance of between 8 and 16 ohms.
40 ot
(3/8 in)
@ Press lever.
@) Insert wire.
@> Release lever.
(ULL
REAR
SPEAKERS
R L
Ry
ce
a2 vom:
SP-A (L)
CENTER
FRONT SPEAKERS
IMPEDANCE SELECTOR f___\
Set this switch to the nominal
impedance of your speakers. ® ©E REAR
tn ok
Position Position #1 #2
aan Sie
A ORB A ORB;
402 TO LESS 8 2 OR MORE
THAN 8 2 :
A + B: 82 OR MORE Rear speaker impedance
Connect rear speaker systems with a nominal
NOTES: impedance of between 8 and 16 ohms.
© Be sure to observe speaker polarity.
* /f you have one pair of speakers only, connect it to front speaker
terminals A or B.
* Position #1: when using one pair of speakers (4 Q to 8 Q) or two
pairs of speakers (8 Q or more for each speaker).
* Position #2: when using on pair of speaker of more than 8 Q.
11
<ARB1173>