Scanner Problems - Ricoh SP 203S Operating Instructions Manual

Scanner Problems

Problem
The scanned image is dirty.
The scanned image is distorted or
out of position.
The scanned image is upside down.
The scanned image is blank.
The scanned image is too dark or
too light.
• The scanning part is dirty.
• Before placing originals on the exposure glass, make
sure that toner or correction fluid is dry.
The original was moved during scanning. Do not move the
original during scanning.
The original was placed upside down. Place the original in the
correct orientation. See page 28 "Placing Originals".
The original was placed with the front and back reversed.
Adjust the image density.
Scanner Problems
Solution
73