Forgotten The Administrator Password; Issues When Sharing Printers; The Shared Server Is Slow - Epson SureColor SC-P5300 Administrator's Manual

Administrator's Guide
❏ IP address entered to web browser when running Web Config
For Self-signed Certificate, change the printer name. The certificate is updated and the printer can be connected.
For CA-signed Certificate, take the certificate again for the printer.
The proxy server setting of local address is not set to web browser.
When the printer is set to use a proxy server, configure the web browser not to connect to the local address via the
proxy server.
❏ Windows:
Select Control Panel > Network and Internet > Internet Options > Connections > LAN settings > Proxy
server, and then configure not to use the proxy server for LAN (local addresses).
❏ Mac OS:
Select System Preferences > Network > Advanced > Proxies, and then register the local address for Bypass
proxy settings for these Hosts & Domains.
Example:
192.168.1.*: Local address 192.168.1.XXX, subnet mask 255.255.255.0
192.168.*.*: Local address 192.168.XXX.XXX, subnet mask 255.255.0.0
Related Information
"Accessing Web Config" on page 23
&
"Assigning the IP Address" on page 19
&

Forgotten the Administrator Password

If you forget your administrator password, contact your dealer or Epson Support.

Issues when Sharing Printers

The Shared Server is Slow

Follow the steps below if operations are slow on shared printers.
1. On the print server computer, select Control Panel > Devices and Printers.
2. Right-click the printer icon (print queue) you want to share, select Printer properties > General tab, and then
select Preferences.
3. Select Monitoring Preferences on the Utility tab in the printer driver.
4. Select Allow monitoring of shared printers.
Solving Problems
51