Advertisement
Charger indicator
Indicator status
b. Installing the battery pack
Warning! Always remove battery pack from your tool when you are assembling parts,
making adjustments, cleaning, carrying, transporting or when it is not in use. Removing
the battery pack will prevent accidental starting that could cause serious personal injury
NOTE: To avoid serious personal injury, always remove the battery pack and keep hand
clear of the lock out button when carrying or transporting the tool.
Slide battery pack into the tool base, Fig 3. Make sure that the battery pack snaps into
place and that the battery is secured in the tool before beginning operation. Improper
installation of the battery pack can cause damage to internal components.
c. Removing battery pack
Locate the battery release catch on the top of the battery and press downwards, Fig 4.
Whilst holding down the battery release catch slide the battery pack away from the tool.
Ready for use
The charger is connected to the mains and is ready for use;
there is no battery pack in the charger.
Charging
The charger is charging the battery pack in charge mode.
Battery pack is full of charge.
Charging is finished and battery pack in the charger.
The temperature of battery is too high or too low, the charger is
under protection status. The charging function can be recovered
after the temperature is normal.
Unrecoverable battery malfunction.
Explanations and actions
10
Advertisement
