Table of Contents
Advertisement
Operating the appliance
en
Switch off your appliance when you do not need to use
it. If no settings are applied for a long time, the
appliance switches itself off automatically.
Switching the appliance on
Use the
button to switch the appliance on.
k
The
symbol above the button is illuminated in blue.
k
The Siemens logo appears in the display, and then a
heating mode and a temperature.
You can specify which heating mode should
Note:
appear after the appliance is switched on in the basic
settings. ~ "Basic settings" on page 22
Switching off the appliance
Use the
button to switch the appliance off.
k
The lighting above the button goes out.
A set function is cancelled.
The time appears on the display.
You can set whether or not the time should be
Note:
displayed when the appliance is switched off in the
basic settings. ~ "Basic settings" on page 22
Starting or interrupting operation
To start operation or to interrupt an operation which has
started running, press the
may continue to run after operation is interrupted.
Press the
button to delete all settings.
k
If you open the cooking compartment door during
operation, operation is interrupted. Close the cooking
compartment door to continue operation.
Selecting an operating mode
When you select an operating mode, the appliance
must be switched on.
Press the
button.
j
1.
The operating modes menu opens.
Touch the required operating mode.
2.
Depending on the operating mode, different options
are available.
Use the rotary selector to change the selection.
3.
Depending on the selection, change further settings.
Use the
u
button to start.
4.
The elapsed time appears in the display. The
settings and progress line can be seen.
Setting the type of heating and temperature
After the appliance is switched on, the set suggested
type of heating appears with the temperature. You can
apply this setting immediately with the
you want to set another type of heating, proceed as
follows.
For other settings, you can change the values as
follows:
Example in the picture: Top/bottom heating at 180 °C.
16
button. The cooling fan
u
u
button. If
Use the rotary selector to change the type of
1.
heating.
Touch the suggested temperature.
2.
Use the rotary selector to change the temperature.
3.
Use the
button to start.
u
4.
The set type of heating and the temperature are shown
on the display.
Rapid heat up
You can use the
button to heat up the cooking
c
compartment particularly quickly.
The rapid heat up function is not possible for all types of
heating.
Suitable types of heating:
4D hot air
:
Top/bottom heating
%
To ensure an even cooking result, do not place your
food and the accessory in the cooking compartment
until rapid heating is complete.
Making settings
Ensure you have selected a suitable type of heating.
The temperature must be set to above 100 °C,
otherwise the rapid heating function cannot be started.
Set the type of heating and temperature.
1.
Press the
button.
c
2.
Advertisement
Table of Contents
