Table of Contents
Advertisement
MN009203A01-AD
Chapter 35 : Site Selectable Alerts
Chapter 35
Site Selectable Alerts
A Site Selectable Alert (SSA) is an Intelligent Lighting indicator with audio alert. The alert is sent to
radios at sites to notify the users when special situations occur.
Your radio supports up to 250 site aliases. Only authorized radios are enabled to send SSA.
NOTE:
The alert alias, alert tone, and alert period are configured in the Customer Programming
Software. Contact your system administrator for more information.
The SSA alert volume is reduced when voice audio is received at the same time. It is important
that the SSA audio file is created with clear loud audio to ensure audio clarity at reduced levels.
35.1
Sending Site Selectable Alert Notification
If you are receiving an alert notification, your radio shows the following indications:
•
Alert tone repeats periodically.
•
The display shows the alert alias with intelligent lighting on the home screen.
Procedure:
1 Press the SSA menu item.
2 Select Start Alert and pressSel.
3 Perform one of the following actions:
•
To send alert notifications to a single site, select the required site alias and press Sel.
•
To send alert notifications to all sites, select [All Sites] and press Sel.
•
To send alert notifications to all available sites, select [All Avail] and press Sel.
4 Select the required alert alias.
5 Select Send.
The display shows Sending req.
If radio is out of range, roaming to a foreign system or in a failsoft situation, the display shows Req
failed.
If the request is successful, the display shows Req successful.
If one or more sites are unavailable, the display shows Not all sites available.
35.2
Stopping Site Selectable Alert Notification
Procedure:
1 Press the SSA menu item.
2 Press Stop Alert→Sel.
3 Perform one of the following actions:
•
To stop alert notifications of a single site, select the required site alias.
100
Advertisement
Table of Contents
