Table of Contents
Advertisement
MN009203A01-AD
Chapter 23 : User Login Feature
Chapter 23
User Login Feature
This feature allows you to take on a friendly username such as Text Messaging Service (TMS).
You can still send text messages without logging in as a user. The user login feature only enables the
recipient of your message to identify you as the sender by assigning a username to your message.
This feature is only applicable for Land Mobile Radio (LMR) Messaging.
NOTE: A predefined username that is set more than the maximum allowed characters is an
invalid name.
23.1
Logging In or Out of the User Login Feature
Logging In the User Login Feature
Procedure:
1 Press the User menu item.
2 Scroll to the predefined user name that is required.
3 Select the predefined user name by pressing Logn.
4 To cancel the login process and return to the initial user login screen, press Back.
If the login process is successful, the radio shows the following indications:
•
The display shows the User Login Indicator (IP Packet Data) icon.
•
The display shows a positive notice.
If the username is invalid or the login process is unsuccessful, the radio shows the following
indications:
•
The display shows a blinking User Login Indicator (IP Packet Data) icon.
•
The display shows a negative notice.
In the non-Automatic Registration Service (ARS) Mode, the display shows Offline.
Logging Out of the User Login Feature
NOTE: Private data refers to all messages in the text messaging folder. The next user is able to
access the messages if private data is not deleted.
Prerequisites: You are logged on or using Offline Mode.
Procedure:
1 Press the Logt menu item.
One of the following scenarios occurs:
•
If the display shows Clear private data?, proceed to the next step.
•
If the Delete Messages On Session End feature is enabled, the radio clears the private data.
The radio then returns to the User Login screen.
84
Advertisement
Table of Contents
