MN009203A01-AD
Chapter 20 : Sending Status
Chapter 20
Sending Status
You can send status messages to the dispatcher. A status transmission makes more efficient use of a
channel as compared to a voice transmission.
Procedure:
1 Press the programmed Status button.
2 Select the required status.
3 To send the status, press the PTT button.
If acknowledgement is received, your radio shows the following indications:
•
Four tones sound.
•
The display shows Ack received.
If acknowledgement is not received, your radio shows the following indications:
•
A tone sounds.
•
The display shows No acknowledge.
80