Table of Contents
Advertisement
1.
OVERVIEW
The A-2410MD is an essential tool for your Panasonic AJ-HDC20A or AJ-HDC27V DVCPRO HD Camera.
The A-2410MD uses the HDSDI output from the camera to provide full image downconverted composite
analog and SDI outputs for local and remote monitoring. The A-2410MD supports all of the HD video
formats from the DVCPRO-HD cameras to allow viewing the signal on standard NTSC or PAL monitors.
The A-2410MD has colour space conversion from ITU rec. 709 to ITU rec. 601, and provides three down
converted formats: letterbox, 4:3 side crop and anamorphic squeeze.
The rugged, lightweight A-2410MD attaches directly to the rear of the DVCPRO HD camera and has an
integrated battery mount for easy installation and use.
The A-2410MD provides downconverted outputs in SDI and NTSC/PAL.
Features:
•
Mounts on the rear of the Panasonic AJ-HDC20A or AJ-HDC27V camera
•
Powered from battery connector or Ext. DC In connector, power is passed on to the camera
•
2 NTSC or PAL outputs.
•
2 SDI outputs
•
Letterbox, 4:3 side crop and anamorphic squeeze down conversion formats
•
Auto video standard detection
•
ITU rec. 709 to ITU rec. 601 colour space conversion
Serial Input
1.5 Gb/s
(SMPTE 292M)
2.
INSTALLATION
2.1.
REMOVING THE CAMERA BAUER BATTERY MOUNT
The A-2410MD is designed to mount on the rear of the Panasonic AJ-HDC20A or AJ-HDC27V Camera. It
may be ordered with an Anton Bauer, IDX or PAG battery adapter plate.
The camera comes fitted from the factory with a bracket for an Anton Bauer battery pack. This adapter
must be removed revealing power connectors on the rear of the camera body. Remove the four screws
that hold the battery mount to the rear of the camera body.
Equalizer
Downconverter
EQ
Indicator
Module
LED
Status
Figure 1: A-2410MD Block Diagram
A-2410MD Monitoring Down Converter Manual
Cable
P/S
Driver
Cable
D / A
Driver
Video
Present
Revision 1.1
SDI Outputs
(SMPTE 259M)
Composite
Analog Outputs
A-2410MD-1
Advertisement
Table of Contents
