Attaching The A-2410Md To The Camera; Figure 2: Rear Of Camera With Battery Mount Removed; Figure 3: Mounting Adapter Bracket On The Rear Of The Camera - evertz A-2410MD Manual

A-2410MD Monitoring Down Converter Manual

Figure 2: Rear of Camera with Battery Mount Removed

2.2.

ATTACHING THE A-2410MD TO THE CAMERA

Remove the U shaped cover plate from the A-2410MD as shown. Feed the camera power connector
through the hole in the cover plate, and fasten the cover to the rear of the camera with the screws supplied
as shown in Figure 3.

Figure 3: Mounting Adapter Bracket on the Rear of the Camera

A-2410MD-2
Revision 1.1