Table of Contents
Advertisement
Assembly:
Use the DEPRAG Grease 807293 (100-g tube) to grease the
ball bearing, needle bearing and gearing parts prior to
reassembly.
a. Clean rotor.
b. Press the ball bearings into the two bearing covers.
c. Press the shaft-side bearing cover with the ball bearing on the rotor.
d. Insert the new vanes into the rotor.
e. Put the rotor cylinder over the rotor.
After assembly the bearing covers shouldn't have any axial
gap. The rotor must turn freely.
f. Press air-connecting side bearing cover with the ball bearing on the
rotor.
For remaining assembly proceed logically in reverse order with reference to
disassembly!
5.1. Service Tools (Optional Equipment)
N
AME
Fixing device (for rotor cylinder)
Arbor (to disassemble bearing cover with grooved rotary joint)
Plier (for threaded fitting 326497)
Hook (for threaded fitting 326497)
Chucking jaws (to clamp motor housing)
Fixture (for motor housing)
Spanner AF 8 (for slide connector 821431)
Spanner AF 17 (for valve housing 374047)
Allen key AF 6
(to push out the motor- and gearing package)
Pressure pin
18
P
N
.
ART
O
461501
462329
461289
323688
461500
462942
800399
800405
800449
460778
Advertisement
Table of Contents
