Advertisement
1.
OVERVIEW
The SCRF series radio frequency ( RF ) passive splitters and combiners provide an economical method of
splitting or combining a number of RF signals in ratios of 1:2, 1:4 or 1:8. They provide low insertion loss,
high return loss, flat frequency response and high isolation between channels. They can be used for
signal distribution in a RF facility, or used to expand the matrix size of Evertz Microsystems XRF1 ( 16x16
) and XRF6 ( 64x64 ) L band routers.
The SCRF products feature RF coax connectors on both sides of the chassis for mounting on either the
front or back of the rack for ease of installation and troubleshooting. They also feature an input monitoring
port for troubleshooting and diagnostics in the RF plant.
The SCRF1 series is housed in a 1RU frame and the SCRF3 series are housed in a 3RU frame. RF
specifications are dependent on the split / combine ratio. The list below includes all possible options of
the SCRF splitter / combiners.
SCRF1 SERIES:
SCRF1-16-1x2
SCRF1-8-1x4
SCRF1-4-1x8
SCRF3 SERIES:
SCRF3-64-1x2
SCRF3-32-1x4
SCRF3-16-1x8
Figure 1: Front View of SCRF3-64-1x2 chassis
Figure 2: Rear View of SCRF3-64-1x2 chassis
16-channel 1x2 splitter / 2x1 combiner
8-channel 1x4 splitter / 4x1 combiner
4-channel 1x8 splitter / 8x1 combiner
64-channel 1x2 splitter / 2x1 combiner
32-channel 1x4 splitter / 4x1 combiner
16-channel 1x8 splitter / 8x1 combiner
Revision 0.0
SCRF Series Splitters and Combiners
SCRF-1
Advertisement
