Table of Contents
Advertisement
Motherboard User's Guide
Install the Motherboard
Install the motherboard in a system chassis (case). The board is a
Micro ATX size motherboard. You can install this motherboard in
an ATX case. Make sure your case has an I/O cover plate
matching the ports on this motherboard.
Install the motherboard in a case. Follow the case manufacturer's
instructions to use the hardware and internal mounting points on
the chassis.
PJ1
ATX1
Connect the power connector from the power supply to the ATX1
connector on the motherboard. The PJ1 is a +12V connector for
CPU Vcore power.
If there is a cooling fan installed in the system chassis, connect the
cable from the cooling fan to the SYSFAN1 fan power connector
on the motherboard.
Connect the case switches and indicator LEDs to the SW1
header.
1
SYSFAN1
1
16
SW1
Advertisement
Table of Contents
