Standard Cmos Setup Page - PCchips P51G Series User Manual

Some options on the main menu page lead to tables of items with installed values
that you can use cursor arrow keys to highlight one item, and press PgUp and
PgDn keys to cycle through alternative values of that item. The other options on
the main menu page lead to dialog boxes requiring your answer OK or Cancel by
selecting the [OK] or [Cancel] key.
If you have already changed the setup utility, press F10 to save those changes
and exit the utility. Press F1 to display a screen describing all key functions.
Press F9 to load optimtimal settings.

Standard CMOS Setup Page

This page displays a table of items defining basic information of your system.
CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc.
Date
Time
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
S-ATA1
S-ATA2
IDE BusMaster
Drive A
: Move Enter: Select +/-/: Value
F1: General Help
Date & Time
These items set up system date and time.
IDE Primary Master/Primary Slave/Secondary Master/Secondary Slave
Use these items to configure devices connected to the Primary/Secondary IDE
channels. To configure an IDE hard disk drive, choose Auto. If the Auto setting
fails to find a hard disk drive, set it to User, and then fill in the hard disk
characteristics (Size, Cyls, etc.) manually. If you have a CD-ROM drive, select
the setting CDROM. If you have an ATAPI device with removable media (e.g. a
ZIP drive or an LS-120), select Floptical.
S-ATA1/2
These items display the status of auto detection of saa devices when "Onboard
SATA-IDE" sets to "IDE".
IDE BusMaster
This item enables or disables the DMA under DOS mode. We recommend you to
leave this item at the default value.
Drive A
The item defines the characteristics of any diskette drive attached to the system.
You can connect one or two diskette drives.
Chapter 3: BIOS Setup Utility
Standard CMOS Setup
Sat 11/05/2005
02:50:45
Not Detected
Not Detected
Not Detected
Not Detected
Not Detected
Not Detected
Enabled
1.44 MB 3 /
1
2
F10: Save Esc: Exit
F9: Optimized Defaults
19
Help Item
User [Enter], [TAB]
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure system Time.