Overview; Figure 1: Front View Of Srf3-64-1X2 Chassis; Figure 2: Rear View Of Srf3-64-1X2 Chassis - evertz SRF Series Quick Start Manual

1.

OVERVIEW

The SRF series radio frequency ( RF ) passive splitters and combiners provide an economical method of
splitting or combining a number of RF signals in ratios of 1:2 or 1:4. They provide low insertion loss, high
return loss, flat frequency response and high isolation between channels. They can be used for signal
distribution in a RF facility, or used to expand the matrix size of Evertz Microsystems XRF1 ( 16x16 ) and
XRF6 ( 64x64 ) RF routers.
The SRF products feature RF coax connectors on both sides of the chassis for mounting on either the
front or back of the rack for ease of installation and troubleshooting. They also feature an input monitoring
port for troubleshooting and diagnostics in the RF plant.
The SRF1 series is housed in a 1RU frame and the SRF3 series are housed in a 3RU frame. RF
specifications are dependent on the split / combine ratio. The list below includes all possible options of
the SRF splitter / combiners.
SRF1 SERIES:
SRF1-16-1x2
SRF1-8-1x4
SRF3 SERIES:
SRF3-64-1x2
SRF3-32-1x4

Figure 1: Front View of SRF3-64-1x2 chassis

Figure 2: Rear View of SRF3-64-1x2 chassis

16-channel 1x2 splitter / 2x1 combiner
8-channel 1x4 splitter / 4x1 combiner
64-channel 1x2 splitter / 2x1 combiner
32-channel 1x4 splitter / 4x1 combiner
SRF Series Splitters and Combiners
Revision 0.1
SRF-1