Install The Mainboard - PCchips M586MR Manual

2: Mainboard Installation

Install the Mainboard

Install the mainboard in a system chassis (case). The board is a
baby-AT size mainboard. However, the board supports an AT and
an ATX power supply so you can use either an AT or ATX system
case. If you use an AT case, some of the ATX power management
features might not function.
Install the mainboard in a case. Follow the instructions provided by
the case manufacturer using the hardware and internal mounting
points on the chassis.
J1: AT
J10
PWR1: ATX
SYSTEMFAN
If you are using a case with an ATX power supply, connect the
power cable from the ATX power supply unit to the power
connector PWR1 on the mainboard.
If you are using a case with an AT power supply, connect the
power cable from the AT power supply unit to the power connector
J1 on the mainboard.
If there is a cooling fan installed in the system chassis, connect the
cable from the cooling fan to the SYSTEMFAN fan power
connector on the mainboard.
Connect the case switches and indicator LEDs to the J10 switch
and LED connector header.
13