PCchips M586MR Manual page 33

LAN Card Power
The system can be turned off with a software
On command. If you enable this item, the system
can automatically resume if there is traffic on
the network adapter. You must use an ATX
power supply in order to use this feature.
Ring On Power On
The system can be turned off with a software
command. If you enable this item, the system
can automatically resume if there is an
incoming call on the Fax/Modem. You must use
an ATX power supply in order to use this
feature.
RTC Alarm Power
The system can be turned off with a software
On command. If you enable this item, the system
can automatically resume at a fixed time based
/Date
on the system's RTC (realtime clock). Use the
/Hour
items below this one to set the date and time of
/Minute
the wake-up alarm. You must use an ATX
/Second
power supply in order to use this feature.
3: BIOS Setup Utility
29