Advertisement
Before You Begin
Before installing the device, the user must:
▪ Read and understand this document.
▪ Verify the Kit Contents.
Alert Symbols and General Restrictions
When any of the following symbols appear, read the associated information carefully.
Symbol
Caution
▪ All examples and diagrams are intended to aid understanding, and do not guarantee operation.
Unitronics accepts no responsibility for actual use of this product based on these examples.
▪ Please dispose of this product according to local and national standards and regulations.
▪ This product should be installed only by qualified personnel.
▪ Failure to comply with appropriate safety guidelines can cause severe injury or property damage.
▪ Do not attempt to use this device with parameters that exceed permissible levels.
▪ Do not connect/disconnect the device when power is on.
Environmental Considerations
▪ Ventilation: 10mm space is required between the device top/bottom edges and the enclosure's
walls
▪ Do not install in areas with: excessive or conductive dust, corrosive or flammable gas, moisture or
rain, excessive heat, regular impact shocks or excessive vibration, in accordance with the
standards and limitations given in the product's technical specification sheet.
▪ Do not place in water or let water leak onto the unit.
▪ Do not allow debris to fall inside the unit during installation.
▪ Install at maximum distance from high-voltage cables and power equipment.
Kit Contents
▪ 1 UniStream PLC
▪ 1 power terminal block
Unitronics
Meaning
Danger
Warning
The identified danger could cause physical and property damage.
Caution
The identified danger causes physical and property damage.
▪ 3 I/O terminal blocks (provided only with models
comprising built-in I/Os)
▪ 1 Battery
UniStream
®
PLC
Description
Use caution.
3
Advertisement
